Analysis of the Causes of Problems Occurring
pubdate：2023-03-28
click:
(1) Excessive use of alloy circular saw blades, excessive temperatures, and deformation of circular saw blades due to external forces should be corrected;
(2) Equipment spindle clearance, runout, and yaw;
(3) The circular saw blade shows cracks, foreign objects attached, and objects outside the cutting data encountered during cutting.
(1) The alloy circular saw blade slips;
(2) The main shaft is stuck by foreign matters;
(3) There is foreign matter and ink blocking the discharge port.
3. Reasons for burrs or unevenness on the surface of the cutting workpiece:
(1) The circular saw blade is not flat and needs proofreading;
(2) Sawtooth defect of circular saw blade;
(3) The device of the circular saw blade is incorrect;
(4) The use time of circular saw blade is too long, and the accuracy of blade head decreases.
4. Reasons for sawing phenomenon:
(1) The design of the alloy circular saw blade is unreasonable and cannot timely remove debris;
(2) The raw material of the saw blade is not suitable for processing;
(3) Excessive use, excessive temperature of circular saw blade;
(4) The circular saw blade is deflected, the machine spindle is bouncing, or the device is incorrect.
